Compressed air purification equipment includes refrigeration dryer, micro heat adsorption dryer, heatless adsorption dryer, compression heat regeneration adsorption dryer, pre filter, oil removal filter, micro oil mist filter, active carbon filter, etc.
It is widely used in automobile, petrochemical, rubber, metallurgy, textile and chemical industry, electronic instrument, painting and plastic spraying and other enterprises. It is an ideal post-treatment equipment for all kinds of oil-free and oily air compressors.
The compressed air purification equipment we provide is mainly used for the treatment of the compressed air at the rear end of the air compressor, usually used together with the air compressor.
The refrigerated compressed air dryer is the most widely used and economical compressed air dryer. The refrigeration dryer produced by our company is made of advanced technology and imported parts, which can be matched with any air compressor to remove the moisture in the compressed air. The gas quality reaches the pressure dew point of 2-10 ℃.
The adsorption dryer is a double tower structure. The compressed air is dried, regenerated, depressurized, heated, regenerated, cold blown and pressurized in the double tower, and the tower is switched every 4 hours or so (the time is adjustable). The conventional pressure dew point of adsorption dryer is - 20~- 40 ℃.
The regeneration adsorption dryer with air consumption/zero air consumption uses the heat from the high-temperature exhaust of the air compressor to directly heat the regeneration desiccant, so that the adsorbent can be completely regenerated. Even under the low pressure working condition of 0.35MPa, as long as the load rate of the compressor is not less than 70%, the drying device can work reliably, the dew point of the product gas can also reach below - 42 ℃, and the pressure dew point can be configured as required to reach - 85 ℃, so it can make full use of its own energy, It has energy-saving effect. The electric heater of the micro heat regenerative dryer is canceled, which is a new energy-saving compressed air drying equipment.
The precision filter is mainly used to filter impurities in the gas, and the dust removal effect of compressed air can reach 0.01 by using filters of different levels according to actual needs μ m. The oil removal effect reaches 0.001 ppm, and the filtering efficiency reaches 99.999%.
Main features: high filtering accuracy, small filtering resistance, long service life, high temperature resistance, filter element is not easy to deform, easy to clean, and filter element is easy to replace.
Yunnan Lanbo Electromechanical Co., Ltd. was established in 2008, focusing on the sales, maintenance, leasing, energy-saving renovation, and wholesale of spare parts of compressed air systems. It is a company specializing in providing compressor system services. With the development of the company in 2017 The branch company Yunnan Hengtong Lite Compressor Co., Ltd. was established. In order to facilitate export transactions, the branch company Yunnan Hengjiu Import and Export Trading Co., Ltd. was established in 2019. main products.
1. Fixed screw air compressors including high voltage 3kV/6kV/10kV models
2. Variable frequency screw air compressors
3. Underground mobile screw air compressors in coal mines
4. Low pressure fixed screw air compressors
5. Permanent magnet variable frequency screw air compressors
6. Engineering mobile screw air compressors
7. Oil-free medium and high pressure machine (supercharger) PET compressor
8. Thousand-type oil-free screw air compressor
9. Series two-stage compression fixed screw air compressor
10. Centrifugal compressor
11. Centrifugal compressor (pressure 0.25-1.6MPa)
Maowan Yang
XW202@163.com
ynlbjd@gmail.com